oscilloscope
This is an old revision of the document!
Table of Contents
How to use oscilloscope
Model: Siglent SDS 1104X-E or SDS1204X-E
Counter function
- Function like scaler in the NIM modules
- Go to Ultility → counter
- Counter on source any of four channel
- Mode: period, frequency, totalizer
- Slope
- Can use trigger out signal for counting the coincidence rate
- Signal out signal is falling, delay by around 5.5us
Trigger
- Edge: negatie slop
- Pattern: can be used for coincidence using AND/OR/ NAND/NOR
oscilloscope.1706694943.txt.gz · Last modified: 2024/01/31 02:55 by nuicise