Differences

This shows you the differences between two versions of the page.

--- teamb2024 [2024/02/29 23:57] – [Allocated hardwares] nuicise
+++ teamb2024 [2025/02/04 00:30] (current) – nuicise
@@ Line 1: / Line 1: @@
-====== TeamB - MPPC arrays (Drafting) ======
+====== TeamB - MPPC arrays ======
-MPPC model + AiT applifier board
+<color #ed1c24>Group members</color>:
+  * **Le Cam Vi**, HUS-VNU, HN
+  * **Nguyen Tuan Khanh**, USTH, HN
+  * **Phung Tan Phat**, HUS-VNU, HCM
+  * **Cao Dinh Minh Quan**, UT-VNU, HCM
+  * **Ngo Viet Hieu**, HUS-VNU, HCM
+<color #ed1c24>Mentors:</color> M.Sc. Sang Nguyen, M.Sc. Quyen Phan
+MPPC model + AiT applifier board (Model PB16HB-S113613006)
 ===== Three main objectives =====
-  * MPPC characteristics: single photon, Cross-talk
+  * MPPC characteristics: single photoelectron, cross-talk, coincidence rate, electric gain
-  * LED optical fiber profile measurement with 4 channels
+  * LED optical fiber profile measurement (center position and width) with 4 channels
-  * Cosmic ray muons
+  * Cosmic ray muons: rate, light yield, at different location (in the ICISE center? basement, 1st floor, 2nd floor, 3rd floor?)
 ===== Allocated hardwares =====
+{{ :hw2024_teamb.jpg?direct&800 }}
   * Oscilloscope for signal recording and digitalized
   * qIt is connected via Ethernet and allowed to remote control from a PC
@@ Line 17: / Line 28: @@
     * Amplifier board
   * Plastic scintillator (2.5cm (width) x 25cm (length) x 1.27 cm (thick)) and wavelength shifting fiber (0.9 cm diameter)
-  * Multi-mode optical fiber (Thorlabs ???)
+  * Multi-mode optical fiber (Thorlabs M133L02)
   * White LED
   * Function generator (model)
@@ Line 23: / Line 34: @@
   * MPPC technical note [[https://www.hamamatsu.com/content/dam/hamamatsu-photonics/sites/documents/99_SALES_LIBRARY/ssd/mppc_kapd9008e.pdf]]
   * MPPC array
-  * ...
+  * Optical fiber datasheet [[https://www.thorlabs.com/thorproduct.cfm?partnumber=M133L02]]