How to use oscilloscope

Model: Siglent SDS 1104X-E or SDS1204X-E

• Function like scaler in the NIM modules
• Go to Ultility → counter
  • Counter on source any of four channel
  • Mode: period, frequency, totalizer
  • Slope

• Can use trigger out signal for counting the coincidence rate
  • Signal out signal is falling, delay by around 5.5us

• Edge: negatie slop
• Pattern: can be used for coincidence using AND/OR/ NAND/NOR

• Cable connect to the local network
• Go to Utility → IO → IP set → Turn on DHCP, get the ip