====== TeamB - MPPC arrays (To-be-updated) ======
<color #ed1c24>Group members</color>:
  * **Le Cam Vi**, HUS-VNU, HN
  * **Nguyen Tuan Khanh**, USTH, HN
  * **Phung Tan Phat**, HUS-VNU, HCM
  * **Cao Dinh Minh Quan**, UT-VNU, HCM
  * **Ngo Viet Hieu**, HUS-VNU, HCM

<color #ed1c24>Mentors:</color> M.Sc. Sang Nguyen, M.Sc. Quyen Phan


MPPC model + AiT applifier board (Model PB16HB-S113613006)

===== Three main objectives =====

  * MPPC characteristics: single photoelectron, cross-talk, coincidence rate, electric gain
  * LED optical fiber profile measurement (center position and width) with 4 channels
  * Cosmic ray muons: rate, light yield, at different location (in the ICISE center? basement, 1st floor, 2nd floor, 3rd floor?)


===== Allocated hardwares =====
{{ :hw2024_teamb.jpg?direct&800 }}
  * Oscilloscope for signal recording and digitalized
  * qIt is connected via Ethernet and allowed to remote control from a PC
  * qPC (IFIRSE #7, Ubuntu) is allocated
  * MPPC array (model xxx)
    * Power board
    * Amplifier board
  * Plastic scintillator (2.5cm (width) x 25cm (length) x 1.27 cm (thick)) and wavelength shifting fiber (0.9 cm diameter)
  * Multi-mode optical fiber (Thorlabs M133L02)
  * White LED
  * Function generator (model)
===== Reference =====
  * MPPC technical note [[https://www.hamamatsu.com/content/dam/hamamatsu-photonics/sites/documents/99_SALES_LIBRARY/ssd/mppc_kapd9008e.pdf]]
  * MPPC array
  * Optical fiber datasheet [[https://www.thorlabs.com/thorproduct.cfm?partnumber=M133L02]]