Neutrino-Pub

User Tools

Site Tools

Trace:
teamc2025

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
teamc2025 [2025/03/04 00:50] – [Team C - PMT (to-be-updated)] nuiciseteamc2025 [2025/03/04 00:57] (current) – [Team C - PMT (to-be-updated)] nuicise
Line 17: Line 17:
 Side note:  Side note: 
   * One PMT seems more noise than the other   * One PMT seems more noise than the other
-  * Some issues when powering both PMTs at the sametime? +  * Some issues when powering both PMTs at the sametime? For operating one PMT, with voltage apply of 14.4V, gain control of 0.9, the returned current is 0.03A if using one PMT, and 0.06A if using two PMT
 ===== Three main objectives ===== ===== Three main objectives =====
   * PMT noise rate, raising, falling; PMT vs. siPM (quantum/detection efficiency, electric gain, linearity, dynamic range)   * PMT noise rate, raising, falling; PMT vs. siPM (quantum/detection efficiency, electric gain, linearity, dynamic range)
teamc2025.txt · Last modified: 2025/03/04 00:57 by nuicise