Differences

This shows you the differences between two versions of the page.

--- teama2023 [2023/02/19 19:50] – [Hands-on Activities] nuicise
+++ teama2023 [2023/03/19 20:42] (current) – [Members/instructor/supporter] nuicise
@@ Line 3: / Line 3: @@
 **Instructor**: Dr. Thanh Dong
 **Supporter**: Ph.D. student, Ngoc Tran; Ms. Linh Pham
+**Members**
+  * Nguyen Thi Minh Hien
+  * Nguyen Thu Hang
+  * Nguyen Phu Huy
+  * Huynh Quoc Thang
+  * Tran Thi Minh Hoan
+[[https://ifirse.icise.vn/nugroup/hardwarecamp/uploads/Hardware_Camp_Project%20(Slide).pdf|Group A's Final presentation]] and [[https://ifirse.icise.vn/nugroup/hardwarecamp/uploads/GroupA_report_Hardware%20camp.pdf|full report]]
+===== Main goals =====
+  * Learn how to make SiPM (in this case we use MPPC) work (soldering the electronic circuit for providing bias voltage and get out the signal )
+  * Explore the properties of MPPC: dark noise; single-photon resolving capability
+  * Understand the functionality of amplifier, discriminator, coincidence, scaler (or counter)
+    * Note the threshold, pulse width
+  * Learn how to use the oscilloscope, particularly the trigger, bandwidth ....
+==== Measurement goals ====
+  * MPPC properties: dark noise rate with trigger 0.5 p.e; 1.5 p.e; 2.5 p.e (compare with the specification). Note the difference in the temperature
+    * Measure the rising time and falling time of the MPPC pulse (before and after amplifier)
+  * Measure the speed of light in the optical fibers
+  * Measure the muon rate
+    * Is it consistent with what we expect?
+    * On average, a muon passing through will deposit how many photo-electrons.
 ===== Hands-on Activities =====
 . Act#1 (1.5h, Feb. 27 AM): safety, lab arrangement, components, rules; light source (LED)  driven with waveform generator, arduino or analog discovery; various LED wavelength; soldering a circuit for LED (this is to use with MPPC later, so think a bit about design to easily coupling to MPPC (direct or with optical fibers, mimicking the use of the WLS))
+  * Try LED with breadboard (or soldering one)
 . Act #2 (1.75h, Feb. 27 PM) oscilloscope, signal generation (with NIM or function generation); MPPC (a SiPM type) circuit,
@@ Line 23: / Line 49: @@
 .  Act #9 (2.75h, Mar. 3 PM): Data taking and analysis
-===== Equipment =====
+===== Equipments =====
   * 4 single mppc/ scintillator/ wavelength shifting fiber
+    * MPPC type: S13360-1325 [[https://www.hamamatsu.com/content/dam/hamamatsu-photonics/sites/documents/99_SALES_LIBRARY/ssd/s13360_series_kapd1052e.pdf]]
+  * Nice DC power supply (Max voltage is 60V/120V)
   * NIM modules (pulse generator, scaler amplifier, discriminator, coincidence)
-  * Oscilloscope Siglent SDS1204X-E 200MHz
+  * Oscilloscope Siglent SDS1204X-E 200MHz, manual [[https://siglentna.com/USA_website_2014/Documents/UserManual/SDS1000X&Xplus_UserManual_UM0101X-E02A.pdf]]
   * Function generator model
+  * Optical fiber beam splitter (Thorlabs part No.) & a a long fiber splitter
+  * DAQ PC: IFIRSE05